Hawke Endurance RD 1x30 Weaver 3 MOA Dot collimator
Hawke Endurance RD 1x30 Weaver 3 MOA Dot all-round collimator sight
Hawke Endurance RD 1x30 is a closed collimator designed to be mounted on a Weaver rail. It will work well on both AR15 carbines, shotguns and hunting weapons. Two mounts are included: low and absolute co-witness, allowing you to adjust the height of the mount to suit your weapon type.
The body of the viewfinder is made of lightweight anodized aluminum, which provides high shock resistance and low weight at the same time. The tube has been cleaned and filled with nitrogen so that the lenses do not evaporate from the inside even with rapid temperature changes.
The collimator is equipped with a 3 MOA red dot aiming mark with 8-position brightness adjustment. This makes it possible to quickly and accurately target in a variety of lighting conditions. The CR2032 battery-based power supply system is supported by a motion sensor that automatically shuts down the device after 5 minutes of inactivity, significantly extending the operating time.
Operation of the viewfinder is intuitive - brightness adjustment buttons are located on the top of the housing, and battery replacement is possible without removing the device, thanks to a side socket.
High image quality is ensured by lenses covered with 25-layer anti-reflective coatings, guaranteeing true 1× magnification, wide field of view and natural color reproduction. Parallax error-free design from 9 meters improves the effectiveness of firefighting.
Changes to the aiming point are made by means of covered adjustment drums with a distinct click every 1 MOA, which prevents unwanted shifts of the aiming mark.
Included:
Hawke Endurance RD 1x30 collimator
Two mounts: low and absolute co-witness with QR lever
Rubber lens cover (bikini)
Allen wrench
Optics cleaning cloth
CR2032 battery
Technical data:
Magnification: 1×
Lens diameter: 30 mm
Target sign type: red dot 3 MOA
Brightness adjustment: 8 levels
Power supply: 1 × CR2032
Motion sensor: yes, automatic shutdown after 5 minutes
Adjustment (click): 1 MOA
Adjustment range (vertical/horizontal): 105 MOA
Housing material: anodized aluminum
Length: 90 mm
Width: 53 mm
Height: 75 mm
Weight: 227 g
Tube filling: nitrogen