Fenix E01 V2.0 flashlight black
Fenix E01 V2.0 is eDC pocket flashlight in the form of a key ring, which after the upgrade emits a flux of 100 lumens, has 3 useful light modes,greater range and an economical controller with no standby current.
Major changes:
- New CREE XP-G2 S3 LED with stronger light output,
- greater range - up to 35 m,
- longer working time - up to 25 hours,
- 3 modes of operation,
- collimation lens,
- smaller size,
- lighter construction,
- working time up to 200 h.
Lightweight and durable
Flashlight body Fenix E01 V2.0 is made of tempered aluminum, subjected to HA-III hard anodizing process, which makes the flashlight's tube and head resistant to scratches, abrasion and mechanical damage.
After reducing the size of the flashlight by 5 mm, it is more manageable and convenient to use. After the upgrade flashlight weighs only 13 g, which is almost half as much as a popular stick battery.
The milled aluminum surface improves grip and prevents the flashlight from slipping out of your hand. Activate the flashlight and change modes conveniently by rotating the head.
Stronger and further
The light source is a powerful Fenix E01 V2.0 LED, which in high mode emits a flux of 100 lumens with a brightness of 304 candelas and a range of 35 m. The light is evenly and widely dispersed thanks to the ultra-thin collimating lens.
Modes of operation
The user has 3 light modes: low, medium and high. In high mode the flashlight can run for up to 50 minutes, in low mode 5 lumens for up to 25 hours. Illumination with a flux of 5 lumens is more than enough to spot light a purse, toolbox or open a door lock.
Power supply - lightweight and easily accessible
The flashlight is powered by one AAA alkaline battery, which can also be replaced with a rechargeable Ni-MH battery. The advantage of such a power supply is its easy availability, low cost, and the imperceptible weight of the flashlight.
The flashlight's long runtime is due to the use of a driver, which does not consume power in standby mode.
Rotary switch
Activate the flashlight and change modes using the rotary switch (flashlight head rotation), which can be conveniently operated with one hand. The minimalist interface makes the flashlight perfect for everyday use, where we usually just need quick access to light.
Security
The flashlight uses system protecting the optical system from overheating. The diode in high mode generates a lot of heat, to reduce the temperature, the controller will automatically reduce the flux by a few lumens.
High protection class IP68 makes the flashlight resistant to total immersion in water (to a depth of 2 m), dust and dirt, and dropping.
Fenix E01 V2.0 is a lightweight and handy flashlight with an efficient light output, which will be great for everyday use, as part of edc gear or a backup flashlight.
The parameters shown were obtained under laboratory conditions. During testing, a 750 mAh Ni-mH battery and a Pairdeer alkaline battery were used.
| Diode | Type | Mode | Maks. luminous flux [lm] | Maks. operating time [h min] alkaline battery/Ni-MH rechargeable battery | Maks. range [m] | Maks. light [cd] |
|---|---|---|---|---|---|---|
| white | continuous | high | 100 | 50 min/ 50 min | 35 | 304 |
| average | 25 | 4 h 50 min/ 4 h 30 min | 19 | 88 | ||
| low | 5 | 25 h / 23 h | 9 | 21 |
TECHNICAL DATA:
Number of modes 13
Maks. working time [h min] 25 h
Maks. luminous flux [lm] 100
Maks. range [m] 35
White diode type: Cree™ XP-G2 (S3)
IP class IP68
Acceptable cell type disposable battery (primary) , rechargeable battery (secondary)
Power supply AAA × 1
Black color
Maks. light [cd] 304
Housing material anodized duralumin
Fall resistance [m] 1
Total length [mm] 66.5
Weight without batteries [g] 13
Head diameter [mm] 15
Body diameter [mm 14
Flashlight kit components AAA battery ×1 , ring to attach flashlight to keys , spare o-ring ×1 (spare seal)
Warranty period 24 months with distributor + 60 months with manufacturer
